verify_cert_with_windows_schannel() rejected a chain whenever
TrustStatus.dwErrorStatus was non-zero, before
CertVerifyCertificateChainPolicy() ran. The
CERT_CHAIN_POLICY_IGNORE_ALL_REV_UNKNOWN_FLAGS flag passed to that
policy check was therefore dead code: a certificate without revocation
information, or one whose CRL could not be fetched, failed with
CERT_TRUST_REVOCATION_STATUS_UNKNOWN.
Drop the pre-check so the SSL chain policy is the only judge.
Revocation checking becomes best-effort: a revoked certificate and
every other chain error are still rejected, while an undetermined
revocation status is accepted.
On a rejected chain, ssl_backend_error() now holds the policy status,
such as CERT_E_UNTRUSTEDROOT, instead of the trust status bit mask.
Adds an explicit namespace qualification and a forward declaration for
class WebSocketClient. This change avoids a name clash on code bases
containing unrelated WebSocketClient classes.
RFC 9110 14.1.2: if the representation is shorter than the suffix-length,
the entire representation is used. range_error computed a negative first
byte position for bytes=-8 on a 7-byte body and answered 416. Clamp it
at 0, as #711 did before the range handling was reworked.
Co-authored-by: youdie006 <youdie006@users.noreply.github.com>
* use the SAN type tag in Mbed TLS verify_hostname and get_cert_sans
Mbed TLS keeps a subjectAltName entry's GeneralName tag in buf.tag and the bare value in buf.p / buf.len. verify_hostname ignored the tag, so a dNSName whose bytes equal an address authenticated that IP host, and an iPAddress or rfc822Name was matched as a DNS pattern. get_cert_sans looked for the tag inside the value, so it reported no entries for an ordinary certificate, or part of a dNSName as an entry of its own.
* Shorten the SAN type comments
---------
Co-authored-by: yhirose <yuji.hirose.bug@gmail.com>
A SubProtocolSelector could return a value outside the client's
Sec-WebSocket-Protocol list, and the server sent it back as is. The
server now treats such a value as no selection.
* reject an unoffered subprotocol in the ws client handshake
* test the subprotocol check through WebSocketClient so the split build compiles
* Trim comments in the subprotocol check
---------
Co-authored-by: yhirose <yuji.hirose.bug@gmail.com>
A 303 response turns the follow-up request into a GET, but only the buffered body and headers were cleared. A content provider (sized or chunked) stayed on the request, so the original payload was sent again, and for a chunked provider the unframed chunks also broke the keep-alive connection.
The redirect also percent-decoded the Location path before sending it. That turned %23, %3F and %25 into a fragment, a query delimiter and a different octet, so the client requested a different resource than the one named, and made set_path_encode(false) fail on any Location containing %20. The path is now sent as given.
The heartbeat thread waited on ping_cv_ without a predicate, so a
spurious wakeup ended the wait early and sent a ping before
ping_interval_sec_ had elapsed. With max_missed_pongs enabled, the
early ping also counted toward the pong timeout.
Pass a predicate to wait_for so that the wait only ends when the
interval elapses or the connection is closed.
Reported in #2612.
An event with an empty id field must reset the last event ID, so that
no Last-Event-ID header is sent on reconnect. run_event_loop only
updated last_event_id_ when the id was non-empty, so it could not tell
an empty id field from an event with no id field, and kept sending the
stale ID.
Track whether an id field was seen with a has_id flag, as has_data
does for the data field, and add a regression test.
A client may pipeline its requests (RFC 9112 9.3.2). The server read the
following request(s) into a per-request SocketStream buffer, discarded them
with the stream after the first response, and then waited in keep_alive()
for socket data that never came, closing the connection after the
keep-alive timeout. Over TLS the bytes stayed decrypted in the TLS library,
where keep_alive() could not see them either.
Create one stream per connection and serve a request that is already
buffered (Stream::is_readable()) without waiting in keep_alive().
Keeping the buffer means an extra CRLF that some clients send after a
request body is now parsed as the next request line, which answered 400
and closed the connection. Ignore one empty line before the request-line,
as RFC 9112 2.2 recommends.
Fixes#2599
A field line without a colon kept the \r of a CRLF line ending in its
name, so "data\r\n" was not recognized. Strip the \r once per line
before parsing instead of from each value.
An event without a data field was neither dispatched nor cleared, so
its event type leaked into the next event and its id only reached
last_event_id after a later event was dispatched. Reset the message on
every blank line and record the id even when nothing is dispatched.
The parsing tests exercised a copy of parse_sse_line that had drifted
from the real one. Run them through SSEClient against a local server
instead, and add regression tests for the cases above.
SSE events may contain an empty data field, and a data field without a colon also has an empty value. Track whether a data field was seen separately from the accumulated payload so empty events are dispatched and leading empty lines are preserved. Add an integration regression test for both forms.
parse_port and the NO_PROXY CIDR prefix parsing each repeated the same
from_chars call, full-consumption check and range check. Move that into
a parse_int_in_range helper and use it in both places.
parse_port checked only the error code of from_chars, which stops at
the first non-digit, so http://host:80abc was accepted as port 80, and
a redirect Location with such a port was followed. RFC 3986 defines
port as *DIGIT. Require the whole string to be consumed, as #2590 does
for quality values.
Every backend loads the Windows ROOT and CA stores, but Windows adds a
root to them only when CryptoAPI needs it to build a chain. On a machine
that had not needed a root yet, the backend rejected the chain before
the CryptoAPI check ran, so Windows never fetched the root (for example
OpenSSL error 20 for accounts.spotify.com under Starfield Root G2).
With Windows verification enabled, the backend's chain verdict is no
longer used. Mbed TLS and wolfSSL skip chain verification during the
handshake, and the post-handshake verify result is ignored. The
CryptoAPI check becomes mandatory: a leaf that cannot be encoded now
fails the connection instead of skipping the check, and the chain must
allow server authentication, which the backends used to check.
A server certificate verifier works on the backend's chain verification,
so when one is set the backend still decides and CryptoAPI only adds its
own check, as before.
ClientCertMissing now disables hostname verification: cert.pem does not
match HOST, and on Windows the hostname check fails before the chain
check.
Refs #2596
CryptoAPI got only the leaf, so it fetched an issuer from the leaf's AIA
URL instead of using the intermediates the server sent. For
accounts.spotify.com that issuer chains to Certainly Root R1, which
Windows does not trust, while the server's own chain ends at Starfield
Root G2.
Add tls::get_peer_certs(), which returns the certificates the peer sent
in the same way get_ca_certs() returns the CA certificates, for every
backend. The CryptoAPI check puts them into a memory store that it
passes to CertGetCertificateChain(), skipping any certificate that
cannot be added. wolfSSL keeps the received chain only when built with
SESSION_CERTS; without it, CryptoAPI still gets the leaf alone.
Refs #2596
A request whose Content-Length was present but not a valid decimal length
(e.g. "42, 42", "+42", "0x2e" or empty) was treated as having no body
unless a handler read it: no 400 was returned, the body was not drained,
and the bytes after the header block were parsed as the next request on
the keep-alive connection. Reject such a request with 400 and close the
connection before routing, as RFC 9112 Section 6.3 requires.
The server also kept reading after a response that announced
Connection: close. A rejected request line or header block left the rest
of the message to be parsed as a new request, and an error response to a
bodyless request did the same with whatever followed. Close the
connection whenever the final response carries Connection: close
(RFC 9112 Section 9.6), and mark the two request-head rejection paths
closed explicitly as the other rejection paths already do.
SSEClient::wait_for_reconnect() sleeps in 100ms steps until the
reconnect interval has elapsed. With an interval of 0 (for example
"retry: 0" from the server, or set_reconnect_interval(0)) it never
slept at all, so a server that sends "retry: 0" and closes the stream
made the client reconnect in a tight loop. set_max_reconnect_attempts()
does not stop this either, because each successful connection resets
the attempt counter.
Always wait at least one step (100ms). Intervals of 1-99ms already
waited 100ms because of the step size, so only 0 and negative values
change behavior.
parse_sse_line checked only the error code of from_chars, which accepts
a leading '-' and stops at the first non-digit, so retry: -1 made the
client reconnect without waiting and retry: 10s set 10 ms. The SSE spec
ignores a retry value that is not all ASCII digits.
Share the server's request-target check as fields::is_request_target()
and use it in write_request_line too. The client previously used
is_field_value(), which let an embedded SP or HTAB through.
encode_path() only escaped CR/LF among the control characters, so with
path encoding enabled a path like "/a\tb" would now be rejected instead
of sent. Percent-encode every control character (0x00-0x1F, 0x7F).
RFC 9112 §3.2 does not allow control characters in the request-target,
and §2.2 requires a bare CR to be treated as invalid. parse_request_line
accepted them, so e.g. "GET /a\rb HTTP/1.1" was routed normally. Reject
any byte that is not VCHAR or obs-text with 400 Bad Request. obs-text is
still allowed since some clients send raw UTF-8 in the target.
req.path is percent-decoded, so a request like GET /%0D%0A... put a
literal CR/LF into the NGINX-style log lines and let a client forge
extra entries. Log the raw req.target (matching NGINX's $request) and
escape '"', '\', control and non-ASCII bytes as \xHH the way NGINX
does. Also note in the README logging section that req.path may
contain control characters and should be escaped before logging.
parse_quality accepted values such as q=0.5junk because it checked only the conversion error and ignored the returned end pointer. Require the numeric parser to consume the complete q parameter so malformed Accept values are rejected and invalid Accept-Encoding weights are ignored. Add regression cases for both headers.
A file served from a mount point or through set_file_content() left in two
writes, one for the status line and headers and one for the body, because the
body came from a content provider. A small file is now read into the header
buffer so the whole response leaves in a single write. Only file-backed
providers are coalesced this way: a user-supplied provider may produce its data
over time, and holding the headers back until it finishes would stall the
client.
A large set_content() body was copied into the header buffer before being
sent. A body of CPPHTTPLIB_SEND_BUFSIZ or more is now written directly after
the headers, which saves the copy at the cost of one extra write.
* Added a feature test to auto enable/disable CPPHTTPLIB_USE_NON_BLOCKING_GETADDRINFO
* turned status: WARNING 'GetAddrInfoExCancel is unavailable; disabling non-blocking getaddrinfo.' into a warning
* added ws2_32 for the GetAddrInfoExCancel. this catches previous false negatives
---------
Co-authored-by: Tobias Wallner <tobias.wallner@qtlabs.at>
open_stream wrote the request line and each header straight to the
socket, so a header rejected by check_and_write_headers left the request
line and the headers before it on the wire. Build them in a BufferStream
first and flush once, as write_request and the WebSocket handshake do.
process_request reads the response even after write_request fails, so
that an early response (e.g. 413/414) sent while the body is still being
uploaded is not lost. A request line or header rejected while the
request is being built in memory never reaches the socket, though, so
no response will come and the client blocked until the read timeout (or
until the server closed the idle connection).
write_request now reports such a local rejection, and process_request
returns immediately in that case. Socket write failures still read the
response as before.
write_request_line checked the request target for CR/LF but concatenated
the method verbatim. A method carrying CR/LF could smuggle a whole
request ahead of the real one, and the client would take the smuggled
request's response as its own. A method with a space or an empty method
put a malformed request line on the wire.
Require the method to be a token (RFC 9110 Section 9.1) before anything
is written. All three callers (the buffered client path, open_stream and
the WebSocket handshake) go through this function and fail with
Error::Write, as they already do for a rejected target.
Claude-Session: https://claude.ai/code/session_01NTDesJQTQPEuu4o4XCu69g
* reject control characters in chunk extensions in read_payload
* Bound every chunk-size line scan by the line terminator
read_payload() ended its scans of one line buffer two different ways: the
hex-size parse and the space skip that follows stopped on the NUL that
stream_line_reader::append() writes, while the new chunk-ext check walked
to an explicit end pointer. Compute that end pointer first and bound all
of them by it, so no scan depends on the buffer's NUL and the terminator
can never be read as line content.
The bare-LF branch is reachable only under
CPPHTTPLIB_ALLOW_LF_AS_LINE_TERMINATOR, where getline() ends the line on
an LF that is the terminator rather than extension text. Say so: the
comment below it explains why a bare LF inside the line is rejected, and
without that note the two read as contradictory. Its guard no longer
depends on the scan cursor either, since all it ever needed was a check
that there is a byte to look at.
* Reuse the chunked-body helper in the chunk-ext acceptance test
AcceptsChunkExtension repeated expect_chunked_body_rejected()'s body
verbatim apart from the expected status, so parameterise the helper on
the status and keep the rejection wrapper for the existing callers. The
decoded body is already checked by the /chunked handler, so asserting
the status is all the new test needs.
Also record why the control-character literal stays split: a hex escape
consumes every hex digit that follows it, so "\x01b" would be the single
byte \x1b rather than \x01 followed by 'b', and joining the halves would
quietly change what the test sends.
---------
Co-authored-by: yhirose <yuji.hirose.bug@gmail.com>
tls::shutdown() on OpenSSL called SSL_shutdown() a second time to wait
for the peer's close_notify. An idle keep-alive client never sends one,
so closing its connection held the worker thread until the read timeout,
and Server::stop() waited for it. Send close_notify and return, as the
Mbed TLS and wolfSSL backends already do.
The server wrote 100 Continue as soon as it saw the expectation, before
pre_routing_handler, pre_request_handler, or routing ran. A request
those handlers rejected, or one that matched no route, still invited
the client to send a body the server would never read.
Defer the interim response until the body is about to be read. If the
request is answered without reading the body, 100 Continue is never
sent and the connection is closed, since whether and when the client
sends the body is unknown.
Also treat a 417 returned by expect_100_continue_handler as the final
response. It used to be written as a bare status line, after which the
request was processed and a second response was written.
The WebSocket upgrade path matched the route and switched protocols
without setting req.matched_route or calling pre_request_handler, so a
check placed there (e.g. authentication) never ran for WebSocket
routes. Set matched_route and run the handler before the upgrade; if it
handles the request, reply with a regular HTTP response instead of 101.
Also write rejected upgrade responses (from pre_routing_handler too)
with write_response_with_content, so they carry Content-Length. Without
it, a client reading the body waited until the keep-alive timeout.
`sed -i ''` is BSD-only: GNU sed takes the '' as the script and the expression as a file name, so `just release --run` failed on Linux before touching anything.
199d7ee made read() return the new ReadResult::Timeout for every read
timeout and leave the connection open. The compile-time server default
(CPPHTTPLIB_WEBSOCKET_SERVER_READ_TIMEOUT_SECOND, 300s) is always in
effect, so a handler written as `while (ws.read(msg))`, the form the
README's Quick Start uses, no longer ended when a peer went quiet:
Timeout is non-zero, so the loop ran its body again with the previous
message still in `msg`, and the worker the backstop is meant to reclaim
was never released. Nothing caught it because every test of the new
result set a timeout explicitly and checked the result by value, and the
heartbeat tests keep the connection alive with pings.
The two timeouts mean different things. One the caller sets through
set_read_timeout() is a request for control back, and is reported as
Timeout on a still-open connection. The compile-time default is a
backstop against a peer that has gone quiet, and elapsing it is now a
failure again: read() returns Fail and closes the connection, as it did
before 199d7ee. WebSocket tracks whether set_read_timeout() was called,
and WebSocketClient carries the same flag over to the WebSocket it
creates on connect().
Tests use the heartbeat binary, which compiles both defaults down to 3s:
a `while (ws.read(msg))` server handler runs its body once and exits
when the client falls silent, and a client that never set a timeout gets
Fail with the connection closed. The README and cookbook now say which
timeout produces Timeout.
Claude-Session: https://claude.ai/code/session_01EF5uZ1X2kaHhqJ8VgfjVaQ
ProxyTest, RedirectTest.HTTPBin*, KeepAliveTest and ProxyTest.SSLOpenStream
still sent their requests through the squid proxies to the external
httpbingo.org, so an upstream hiccup there failed CI with no code change
involved (KeepAliveTest.SSLWithDigest got a 502 on its first /get).
Switch them to the "httpbin" container (nginx + go-httpbin) that
BaseAuthTest/DigestAuthTest already use. go-httpbin serves /get,
/redirect/n and /digest-auth the same way, so the test logic is
unchanged; the SSL variants disable certificate verification for the
self-signed test cert, as BaseAuthTest.SSL does.
RedirectTest.YouTube* is left pointing at youtube.com since it exercises
a real cross-host, http -> https redirect chain.
Claude-Session: https://claude.ai/code/session_0148ZAzsuYRYXkwcA7UFeh95
The intermittent failures it was tracking stopped after the graceful
drain before close in 8e702d3: no windows-without-SSL test failure on
master since 2026-08-09. Drop the reporting step, the issues: write
permission it needed, and the run_tests step id that only it used.
Claude-Session: https://claude.ai/code/session_0148ZAzsuYRYXkwcA7UFeh95
* reject ambiguously framed responses in client read paths
* Accept non-chunked Transfer-Encoding responses in the client framing guard
RFC 9112 §6.3 treats requests and responses differently when the final
transfer coding is not chunked: a request's body length cannot be
determined and the server must answer 400, but a response's body simply
runs until the server closes the connection. read_content() and the
open_stream() body reader already do that, so such a response is not
ambiguous and rejecting it broke valid responses such as
"Transfer-Encoding: gzip" followed by a close.
Keep rejecting a Transfer-Encoding paired with a non-zero Content-Length,
which is the actual ambiguity, and drop the non-chunked clause from both
client read paths.
Tests: check that rejection surfaces as Error::Read, that a non-chunked
Transfer-Encoding response is read until close on both paths, and that
HEAD, 204 and 304 responses with both framing headers are not rejected.
Claude-Session: https://claude.ai/code/session_01JYPWKpbp4a881EdpEf2xSi
* Share the framing check and reuse existing test helpers
Factor "Transfer-Encoding with a non-zero Content-Length" into
detail::has_conflicting_content_length() next to
is_chunked_transfer_encoding(), and call it from the server request
guard and both client read paths so the rule and its RFC 9112 §6.3
rationale live in one place.
In the tests, drop the POSIX-only raw socket helper in favour of the
existing serve_single_response() and read_all(), which also lets the
tests run on Windows. Fold the stream-only test into the buffered one so
each case checks both Get() and open_stream(), and cover the HEAD/204/304
exclusion on the open_stream() path too.
Claude-Session: https://claude.ai/code/session_01JYPWKpbp4a881EdpEf2xSi
---------
Co-authored-by: yhirose <yuji.hirose.bug@gmail.com>
